News

We are pleased to announce that we will be participating in the CTT Expo&CTT Russia from 2023/5/28-2023/5/231. CTT is an international exhibition for construction and mining...

From April 24th to 27th, local time, the Paris International Construction Machinery and Building Materials Machinery Fair (INTERMAT 2024) was held at the Villepinte Exhibition C...

During normal use, the original accuracy of a two-stage reducer will vary with the duration of operation.

The workplace, transmission efficiency, load capacity, and lubricating oil grade used in the two-stage reducer must comply with the values specified in the reducer specifications.

For elevators, the brake is both a working device and a safety device.

Due to the use of mechanical electric brakes, it is also very important to inspect the electrical components of the brakes.

The brake is installed on the axle housing, the brake drum is installed on the wheel core, and the wheel core is installed on the half axle guide through bearings

The working principle of a brake is mainly based on the generation of friction and torque, which decelerates or stops moving parts through the friction between the friction plat...

Release the fixing screw of the handbrake cable, adjust the length of the handbrake cable to be appropriate, and then fix the fixing screw of the handbrake cable.

Vehicle preparation. Park the vehicle on a flat and safe surface and use the handbrake to ensure stability.

The so-called transfer box is a device that distributes the power of the engine, which can output power to the rear axle or both front and rear axles.

A simple schematic diagram of the hydraulic braking system can be used to illustrate the working principle of the braking system.